TeleAdapt P
owerHub USB
™
|
Installation Guide
TeleAdapt P
owerHub USB
™
|
Installation Guide
Preparation For Installation
The PowerHub USB is designed to be installed in furniture.
Ensure the location chosen for the equipment complies with the requirements
of the “Important Safety Instructions” on page 6 of this guide.
A cutout will need to be made in the furniture. Other than this the only
tools you will need are a small sized cross head screwdriver and a
medium sized cross head screwdriver.
See cutout dimensions below.
Installation
Before starting installation make sure you have read and understood
the “Important Safety instructions” on page 6 of this guide.
Step 1
Confirm the furniture cutout dimension to accommodate the PowerHub
USB is within the limits shown below. Note that in addition to the
minimum depth requirement of 60mm (2.37 in) there should also be
at least 50mm (1.97 in) clearance below the unit to allow cabling to
exit cleanly.
Step 2
Remove the PowerHub USB and any supplied power cable and trims
and/or end caps from the box.
Installation instructions continued on page 10.
8
9
What Is Included In The Box
Classic Trim
Slimline Trim
1X
PowerHub USB Main Unit.
1X
PowerHub USB Main Unit.
2X
Silver end caps.
1X
Black trim.
2X
Black end caps.
1X
Metallic.
4X
Fixing screws.
4X
Fixing screws.
1X
Installation Guide.
1X
Installation Guide.
PowerHub USB Main Unit with Classic Trim pre-fitted and choice of End Caps.
PowerHub USB Main Unit with Spacers pre-fitted and choice of Slimline Trims.
In addition for EU, UK, EK variants
1x
Mains Cable.
70mm(max)
2.87In
