End user instructions
│
T9/T11
│
Chapter 2: Safety
l
Always contact your representative for service and maintenance work on the
product.
l
Keep contacts and antennas clean.
l
Wipe off dust using a clean, slightly damp cloth.
l
Never use cleaning solutions.
l
Check the encapsulation, foils and cable for damages every day. If you use
the product although the encapsulation or foil is damaged, moisture can
cause serious damage to the electronics.
2 .2 S af ety f eatu res
2 .2 .1 S T O P B UT T O N
Tele Radio AB transmitters are equipped with a stop button.
When the
Stop
button is pressed, the stop relays on the
receiver deactivate.
IMPORTANT! The Stop button should always be tested before operating the
transmitter. This test should be done on each shift, without a load.
To test the stop button:
1. Press the
Stop
button.
2. Twist and release the
Stop
button.
ED-TG2-TX102-EN-v02
11
