TelcoBridges 800 1+1 series, Руководство по установке, Страница: 41 / 58

35
Installing the Equipment
2.6.2 Install the 800 1 unit on the Equipment Rack
The 800 1 unit is mounted on a customer provided equipment rack using the mounting
hardware packaged in the box. Refer to
Section 2.2 “Rack Mounting the 800 Series Standalone or the
800 Series 1+1 System” on page 9.
2.6.3 Install the 1+1 Patch Panel
2.6.4 Connect to the 800 Series 1+1 Management Interface
The 800 series redundant management interfaces enables administrators to perform management
tasks on the 800 series equipment. Connect each management interface to different Ethernet switches.
2.6.5 Connect to the 800 Series 1+1 Control Network
The 800 series and 800 1 units feature dual GigE ports to connect to the 800 series control
network, which allows both units to communicate with each another.
If you are installing an 800 1 unit, the
associated one or two 1+1 patch panels will
look like the image to the right. Refer to
Section
2.4.3 “Connecting to the PSTN” on
page 16.
Network
Gateway
Gateway
1+1 Patch Panel (8 T1/E1)
Follow the procedure described in
Section 2.5.1 “Connecting to the 800 Series
1+1 System Management Interfaces” on
page
22.
Gi g abit
Ethernet
Switch 1
Gi g abit
Ethernet
Switch 2
15 14 13 12
10 11 8 9 3 2 0
7 6 5 4
1
MGMT0
MGMT1
ETH0
ETH1
VOIP0
VOIP1
15 14 13 12
10 11 8 9 3 2 0
7 6 5 4
1
MGMT0
MGMT1
ETH0
ETH1
VOIP0
VOIP1
Follow the procedure described in
Section 2.5.2 “Connecting to the 800 Series
1+1 System Control Network” on page 23.
15 14 13 12
10 11 8 9 3 2 0
7 6 5 4
1
MGMT0
MGMT1
ETH0
ETH1
VOIP0
VOIP1
15 14 13 12
10 11 8 9 3 2 0
7 6 5 4
1
MGMT0
MGMT1
ETH0
ETH1
VOIP0
VOIP1