TelcoBridges 800 1+1 series, Руководство по установке

Страница: 16 / 58

800 Series Standalone and 800 Series 1+1 System Installation Guide
10
2.2.3 Installing the 800 Series Standalone and the 800 Series 1+1 on an
Equipment Rack
Both the 800 series standalone and the 800 series 1+1 system are mounted on the 19" equipment rack
using the angle brackets and screws provided in the box.
Mounting the 800 Series Standalone:
1. Using four metal screws, attach one angle bracket to the front, left-hand side of the 800 series unit,
as shown in
figure 2.1 on page 11. Do the same for the angle bracket on the right-hand side.
2. Start mounting equipment at the top-most position of the rack, keeping in mind the space required
on the equipment rack as described in Section
2.2.2 “Vertical Placement of the Equipment” on
page 9.
Mounting the 800 Series 1+1 System:
1. Mount the 800 series unit as mentioned above.
2. Install the 800 1 unit below the 800 series unit, as shown in figure 2.1 on page 11.
3. To attach the 800 1 unit to the equipment rack, follow the previous procedure.
4. Install one or two patch panels below the 800 1 unit, as shown in figure 2.1 on page 11.