Tekvox TEK 1201-MV, Руководство пользователя

Страница: 51 / 54

www.tekvox.com
1201-MV
79033-MV User Manual
Command Description
Command Example and
Feedback
zzzz = ASCII data to be sent (Up to 48
characters)
Notes :
1. When reading “ \ x”, the two characters after
“ \ x” will be converted to HEX automatically
2. When typing “ \\ ”, only one “ \ ” will be sent
3. When reading “ \ r”, “ \ r” will be converted to
“0x0D” in HEX
4. When reading “ \ n”, “ \ n” will be converted to
“0x0A” in HEX
Baud rate: 9600
Power on to send:PowerOn1
/-PU[ x ]: zz zz
Set the HEX “Power On” command " zz zz " to be
sent to a remote display when powering on the
switcher
x = Baud rate (1 ~ 5)
1 - 115200
2 - 57600
3 - 38400
4 - 19200
5 - 9600
zz zz = HEX data to be sent ( z = 0~9, A~F and
up to 20 octets)
/-PU[5]:50 6F 77 65 72 4F 6E
Baud rate: 9600
Power on to send HEX:50 6F 77
65 72 4F 6E
/+PD[ x ]: zzzz
Set the ASCII “Power Off” command " zzzz " to be
sent to a remote display when the switcher
enters Standby Mode
x = Baud rate (1 ~ 5)
1 - 115200
2 - 57600
3 - 38400
4 - 19200
5 - 9600
zzzz = ASCII data to be sent (Up to 48
characters)
Notes :
1. When reading “ \ x”, the two characters after
“ \ x” will be converted to HEX automatically
2. When typing “ \\ ”, only one “ \ ” will be sent
3. When reading “ \ r”, “ \ r” will be converted to
“0x0D” in HEX
4. When reading “ \ n”, “ \ n” will be converted to
“0x0A” in HEX
/+PD[5]: ABCDEFG\x\n12
Baud rate: 9600
Enter sleep to
send:ABCDEFG0A12