www.tekvox.com
1201-MV
79033-MV User Manual
4.5 Video Signal Switching
In Multiview modes
Operation: Input # + Window #
Example: Switch Input 1 to Window B:
Press
“
Input 1
”
(The input 1 LED will turn blue, and the A~D LEDs will flash.)
Press
“
Window B
”
(The A, C, and D LEDs will go out, and then the input 1 and Window B LEDs will flash three times. The
input 1 LED will then go out, and the A~D LEDs will turn blue.)
In Fullscreen Mode
1.
Manual Switching
Operation: Directly press Input #
If Input 2 is currently set to fullscreen Window A, press
“
Input 3
”
to switch HDMI Input 3 to Window
A. The Input 3 and Window A LEDs will then turn blue.
2.
Auto Switching
Press the
“
AUTO
”
button to enable or disable auto-switching mode. Note that auto-switching mode
only works while in Fullscreen Mode. When in auto mode, the switcher will switch according to the
following rules:
⚫
The switcher will switch to the available active inputs with the following priority: Input 1 > Input
2 > Input 3 > Input 4 > Input 5 > Input 6 (USB-C). When the input source and output window are
connected, the corresponding LEDs will turn blue.
⚫
New input: The switcher will automatically select a new input once it has been detected.
⚫
Reboot: If power is restored to the switcher, it will automatically reconnect to the input that
was active when the switcher powered off.
⚫
In auto-switching mode, the input source can be switched manually, but doing so will exit auto-
switching mode
⚫
When changing from Fullscreen Mode to Multiview mode, auto-switching mode will not exit.
4.6 Switching Status
In Multiview mode, the LEDs for Windows A, B, C, and D will turn blue
Operation: Press and hold
Window #
button for at least 3 seconds.
Example: To determine which source is being sent to Window B, press and hold the
Window B
button
for at least 3 seconds. Windows A, C, and D
’s
LEDs will turn off, and the LED of the input being sent
to Window B will light up (e.g. if Window B is currently set to Input 2, the Input 2 LED will light up).
After 3 seconds, the Window A, B, C, and D LEDs will turn back on, and the Input 2 LED will turn off.
