www.tekvox.com
1201-MV
79033-MV User Manual
3. Panel Description
3.1 Universal Switcher Front Panel
1.
IR LED:
Built-in IR sensor; receives IR signals sent from IR remote
2.
POWER LED:
Lights up red when switcher is in Standby Mode, or green when device is powered on
3.
INPUT BUTTONS
:
⚫
1~6:
Input source selectors
⚫
AUTO:
Enables or disables auto-switching when in Fullscreen Mode
4.
MULTIVIEW:
Selects the four most commonly used built-in Multiview modes
5.
SELECT/FULLSCREENS (A~D):
Window A ~ D buttons are for output selection and Fullscreen
settings
6.
MIRROR:
Sets the local HDMI output as HDBT loop out. (e.g. HDMI and HDBT ports
simultaneously output the same signal source)
7.
BYPASS HDMI 1:
Sets the local HDMI output port to output the HDMI input 1 source signal
8.
AUDIO CONTROL
:
⚫
Press the volume knob to select MIC or SOURCE audio to be controlled. With MIC audio
selected, the MIX and MIC mixing audio inputs are controlled simultaneously.
⚫
Rotate the knob to increase or decrease the volume of the selected audio
⚫
Press and hold the knob for at least 3 seconds to mute the selected audio; rotate the knob to
unmute.
Note: Please refer to 4. Front Panel Control for more details about button usages.
3
1
2
5
6
7
8
4
