Tektronix WFM2200A, Руководство пользователя

Страница: 170 / 276

Waveform display
The Waveform display is a voltage versus time display of the SDI video signal.
You can view the signal in line or field sweep, choose which SDI signal elements
are displayed (RGB, YRGB, or YPbPr), and apply filters to the signal.
You can also display the SDI signal as if it were a composite signal and control
(from the CONFIG menu) whether the EAV, SAV, and ANC data is included in
the display.
To access the Waveform
display
1. Press and hold the WFM button to open the Waveform pop-up menu.
2. Use the arrow keys to select Display Type > Waveform .
3. Press the WFM button to close the pop-up menu.
Elements of the Waveform
display
The following elements appear on the display:
■
V Gain: Shows the current vertical gain setting when the gain is other than
1x. Press and hold the GAIN button to select a vertical gain setting. See also
MAG, GAIN, SWEEP, and CURSOR buttons on page 151.
■ Mag: Shows the current horizontal magnification factor when the
magnification is other than 1x. Press and hold the MAG button to select a
magnification factor. See also
MAG, GAIN, SWEEP, and CURSOR buttons
on page 151.
Display modes
148 WFM2300 and WFM2200A Waveform Monitors User Manual