Tektronix TCPA300 SERIES, Инструкция по эксплуатации

Страница: 98 / 205

TCPA300 and TCPA400 Performance Verification
5- 8
TCPA300/400 Amplifiers and TCP300/400 Series Current Probes Instruction Manual
d. Calculate the %Error between the measured output, M
1
, and the
expected output (V
E
) %Error as follows:
% Error
=
M
1
−
V
E
V
E
×
100
For example, using an expected output V
E
of 2.5000 V and a measured
output
M
1
of 2.510, the
%Error
would be:
% Error
=
2.5100
−
2.5000
2.5000
×
100
= +
0.4%
NOTE
. It is important that the correct polarity be used to calculate the %Error.
6. Verify that the measured DC gain accuracy is within the limits specified for
all settings in the test record on page 5--16 for the TCPA300 (page 5--17 for
the TCPA400). Record the %Error in the test record.
NOTE
. If the %Error on any of the settings is greater than the specified limit, you
must perform the adjustment procedure that begins on page 6--3.
7. Disconnect the DMM cable from the amplifier and the calibration adapter
from the current source.