Tektronix P7313SMA, Техническое описание

Страница: 44 / 62

Performance Veri fi cation
Performance Veri fi cation
Use the following procedures to verify speci fi cations of the probe. The recommended calibration interval is one year.
These procedures test the following speci fi cations:
Differential mode input resistance
Termination voltage accuracy
Output offset zero
DC gain accuracy
Differential mode rise time
Equipment Required
A list of the equipment required to verify the performance of your probe is shown. (See Table 8.)
Table 8: Equipment required for performance veri fi cation
Item description Performance requirement Recommended example 1
Oscilloscope TekConnect interface Tektronix TDS6804 or TDS7704
Sampling Oscilloscope Windows 2000 OS, with oscilloscope
FW
≥
V2.5 (for compatibility with
Tektronix 80E08/10 modules)
Tektronix TDS8000
Sampling Module 30 GHz bandwidth Tektronix 80E08
Sampling Module 20 GHz bandwidth Tektronix 80E04
TekConnect Probe Interface Module
with semi-rigid cable Firmware version V2.2 or above Tektronix 80A03, with 174-4857-xx
cable
DMM (2), with leads 0.1 mV and 0.01 Ω resolution Fluke 187 or equivalent
Dual Power Supply 5.0 VDC at 200 mA B+K Precision 1760A or equivalent
Feedthrough Termination BNC, 50 Ω ±0.05 Ω 011-0129-00
Attenuators (2) SMA, 50 Ω , 5X attenuation 015-1002-01
Coaxial cable Male-to-Male SMA 012-0649-00
Coaxial cable Dual, matched-delay Male-to-Male
SMA 174-4944-00 2
Coaxial cable Male-to-Male BNC, 50 Ω 012-0057-01
Test leads (2) Banana plug ends, red 012-0031-00
Test leads (2) Banana plug ends, black 012-0039-00
Test leads 0.080 in pin-to-Banana plug ends, one
each color 012-1674-00 (red) 2
012-1675-00 (black) 2
Adapter (See Figure 21 on page 33.) Tektronix TCA-SMA
Adapters (3) SMA 50 Ω termination 015-1022-00 2
Adapter SMA Male-to-SMA Male 015-1011-00 2
Adapters (2) 0.040 in-to-0.080 in pin jack 012-1676-xx 2
32 P7313SMA Technical Reference