Tektronix P6910, Инструкция по эксплуатации

Страница: 45 / 48

Glossary
Functional check procedure
Functional check procedures verify the basic functionality of the probes by
con
fi rming that the probes recognize signal activity at the probe tips.
Keep out area
The area of the printed circuit board in which only probe components may
be mounted.
Logic analyzer-end
The end of the probe which connects to the logic analyzer.
Module
The unit that plugs into a TLA7000 series mainframe which provides
instrument capabilities such as logic analysis.
Podlet
A circuit contained in a fl ex lead and attached to a probe which provides
square-pin connections to the circuit under test for one data acquisition
channel and a reference pin.
Podlet holder
A removable clip that groups eight individual podlets into a single 8-wide
P6910 probe assembly. This provides ease when connecting to a row of 2 x
8 2.54 mm (0.100 in) square pins.
PCB
An acronym for Printed Circuit Board.
Probe head
The end of the probe that connects to the SUT.
SUT
System-Under-Test. Also known as the target system. The logic analyzer
connects to the SUT through the probe.
Way station
An intermediate probe part is used to connect the heads of the P6910 probes
to a single ribbon cable.
P6910 General Purpose Probe Instruction Manual 31