Tektronix 2252, Руководство оператора

Страница: 105 / 114

Operators Familiarization
RECALL
ONLY? (IN S T O R E /R E C A L L )
NO
K E E P M E N U O N W H E N
S/R SELECTED? YES
2. Press the STORE/RECALL SETUP button to call up the Store/Recall
Setup menu.
3. Rotate the -H control to review the stored setups. Determine whether
there are enough EMPTY locations to store all of the setups in your
sequence. There are a total of 20 locations available. It is a good idea to
use only 19 and leave the 20th open so that the system will have a place
to store the last deleted file for recovery when necessary.
If there are not enough locations available to store your setups, you can
use DELETE to remove unneeded setups or you can use the STORE
function to write over them.
4. Set the front-pane! controls as desired for the first setup in your
sequence. Set all controls the way you want them; even the intensity con­
trol settings can be stored for recall. You can set the front-panel controls
in several ways: setting the individual controls manually, inputting the
desired signals and pressing the AUTO SETUP button, or by recalling
and modifying an already stored setup.
5. Rotate the -H control to the setup location that is to precede or start the
first setup in the sequence.
6. Press INSERT NEXT (or STORE, if the current setup location is to be
written over).
7. Press ALTER LABELS to call up the ALTER LABELS menu and give the
desired name to your setup. Also make sure that the status is blank for all
of the setups in the sequence, except the last one, and that one should be
END SEQ. END SEQ is used to mark the last setup in a sequence using
the ALTER LABELS function.
k
8. Press RETURN to display the Store/Recall Setup menu.
9. Repeat the above process of inserting or storing (writing over) until all the
setups in your sequence are stored in memory.
10. if your sequence did not begin at setup location 01, use the ALTER
LABELS menu to alter the status of the setup just preceding your first
setup in the sequence to END SEQ.
2252 Operators
3-49