LoRa IoT Industrial Tracker User Guide
T0006279_UG
Version 1.1
TEKTELIC Communications Inc.
Confidential
Page 14 of 17
•
Use a magnet to apply the specified magnetic pattern describe in Section 2.4 to the Tracker
•
Open up the Tracker, then press the reset button on the PCBA, then use a magnet to apply the
specified magnetic pattern describe in 2.4 to the Tracker
•
Open up the Tracker, remove the batteries for a minute, then replace the batteries
To completely power off the Tracker:
•
Open up the Tracker and remove the batteries
To put the Tracker to DEEP SLEEP:
•
Open up the Tracker, then press the reset button on the PCBA
To awaken the Tracker from DEEP SLEEP, do
one
of the following:
•
Use a magnet to apply the specified magnetic pattern describe in Section 2.4 to the Tracker
•
Open up the Tracker, remove the batteries for a minute, then replace the batteries
NOTE:
Any resetting of the Tracker will cause all unsaved user configurations to be lost. Save your
desired configuration to the Tracker flash before powering off, putting to DEEP SLEEP, or resetting the
Tracker.
