TEKTELIC Communications T0006129, Руководство пользователя

Страница: 11 / 17

LoRa IoT Industrial Tracker User Guide T0006279_UG Version 1.1
TEKTELIC Communications Inc. Confidential Page 11 of 17
Figure 2-1: The Industrial Tracker magnetic wake-up pattern.
The Tracker can be put into the DEEP SLEEP state at anytime by opening it up and pressing the
internal reset button located visibly on the Tracker PCBA. If put to DEEP SLEEP, the Tracker can be
woken up again using the same procedure explained above, i.e. by the use of the magnet. Removing
the batteries for a minute and replacing the batteries can also awaken the Tracker.
Note: Replacing the batteries of the Tracker does not cause the Tracker to go to DEEP SLEEP. As soon
as new batteries are inserted, the Tracker boots up and tries to join a LoRaWAN.
2.5 Mounting
On either side of the enclosure there are two mounting holes, see Figure 2-2 . These mounting holes
can be used to screw the enclosure to a solid surface. The mounting holes are T-shaped slots so the
device can be secured with ropes, zip ties or screws depending on the user
’ s needs. The
recommended mounting screw size is M3. Mounting screws are not provided with the Tracker.
Figure 2-2: The mounting holes and enclosure screw holes.
The mounting surface must be capable of holding > 2 kg (4.5 lbs).
t (seconds)
0 5 10
P A P A
P: Magnet Present (attach magnet to enclosure on the magnet sign)
A: Magnet Absent (take magnet at least 2 cm away)
5 seconds
Pattern starts Pattern ends