Tekron NTS 03-G+, Руководство пользователя

Страница: 10 / 32

TEK-NTS03-G+-Manual-v3.-012022
P a g e | 10 www.tekron.com
© 2022 by Tekron International Limited. All Rights Reserved. All trademarks are the property of their respective holders. The
information in this document is provided for informational use only and is subject to change. For further information or support,
go to www.tekron.com.
LED Indicators
The SYNC LED show the synchronization status of the NTS 03-G+ to the active primary
reference source. The primary reference source could be GNSS, PTP, NTP or IRIG-B.
LED Indicators Table 3 – SYNC LED
State Description
Off The NTS 03-G+ has no power
On
The NTS 03-G+ is synchronized to the source indicated by the LCD
display
Slow Flash (1 flash per
second)
The NTS 03-G+ is operating in the “holdover” state (holdover timer
running) or is operating in the “tuning” state (time server is gaining
synchronization)
Fast Flash (5 flashes per
second)
The NTS 03-G+ is not synchronized. “Out of Sync” condition
The
ALM LED indicates the internal alarm status of the NTS 03-G+. It has only two operating
states: -
LED Indicators Table 4 – ALM LED
State Description
Off The NTS 03-G+ is operating normally, i.e., there are no alarms
Fast Flash (5 flashes per
second)
At least one alarm is active. Refer to the alarm window in the Clock
tab of the Configuration Tool to find the name of the active alarm(s).
A shorthand version of the alarm name will also appear on the LCD.
Refer to the - Alarm Definitions table below for the details on each
alarm by name.
Table 5 - Alarm Definitions