TEK-NTS03-G+-Manual-v3.-012022
P a g e
| 7
www.tekron.com
© 2022 by Tekron International Limited. All Rights Reserved. All trademarks are the property of their respective holders. The
information in this document is provided for informational use only and is subject to change. For further information or support,
Figure 3 - Start Up (Time Server ID)
Figure 4 - Waiting for Satellites
Figure 5 - Operating Default
Figure 6 - Local Time
Figure 7 - UTC Time
Figure 8 - Alarm
Figure 9 - IP Address
Figure 10 – LCD display screens (examples)
“UTC” is the abbreviation of Coordinated Universal Time (approximately equivalent to GMT).
The top line of screen in Figure 5 shows the time server’s current local time offset from UTC
(hours and minutes), together with the local date. The local time day-of-year and time-of-day
are on the bottom line.
Figure 5 shows that the time server is operating with a local time offset of 12 hours ahead of
UTC. The local date is the 17th of March 2010, and the local time is 11:16:53 in the morning.
Figure 6 shows the same time and date, but also indicates that the time displayed is Local
Standard Time, and that the day is Tuesday. “LST” denotes Local Standard Time. If daylight
savings time is active, the “LST” in screen Figure 6 - Local Time changes to “LDT”, denoting Local
Daylight Time.
Figure 7 shows the UTC time and date which is 23:16:53 (11:16:53pm) on the evening of
Monday the 16th of March 2010.
Figure 8 shows that an antenna alarm is active in the time server. All active alarms will be
displayed in the same way.
Figure 9 shows the basic Ethernet network settings for Admin/ETH1 port. In this example, it
shows the port has been configured with a fixed/static IP address of 192.168.96.10.
NTS 03-G + Ver X.XX
(C) 2014 Sn18748
WAITING FOR SYNC
GPS RX STAT: 00A
UTC+1200 17MAR10
076 11:16:53 87A
LST: TUE 17 MAR10
076 11:16:53 87A
UTC:MON 16
MAR10
*** ANT ***
075 23:16:53 87A
Fixed:
192 . 168 . 096 . 010
