Tekram Technology P6L40-A4E, Руководство пользователя

Страница: 28 / 53

MAINBOARD BIOS SETUP MAINBOARD BIOS SETUP
P6L40- P6L40-A A4 4E E User’s Manual User’s Manual
28 28
Video BIOS Shadow - This option controls the location of the contents of the 32KB of
Video ROM beginning at the C0000h memory location. The settings are:
Enabled The contents of C0000h-C7FFFh are written to the same address in system
memory (RAM) for faster execution.
Disabled The video ROM is not copied to RAM. The contents of the video ROM cannot be
read from or written to cache memory.
C8000-DFFFF Shadow - These options control the location of the contents of the 16KB
expansion card ROMs beginning at the specified memory location. If no adapter ROM is
using the named ROM area, this area is made available to the local bus. Shadowing a ROM
reduces the memory available between 640KB and 1024KB by the amount used for this
purpose. The settings are
Enabled or Disabled .
Chipset Features Setup
This setup menu contains advanced configuration options relating to the mainboard chipset.
These options are rarely changed by the user.
Auto Configuration : Enabled SDRAM RAS-To- CAS Delay : Fast
DRAM Speed Selection : 60ns SDRAM RAS Precharge Time : Fast
MA Wait State : Fast SDRAM CAS Latency Time : 2
EDO RAS# To CAS# Delay : 2
EDO RAS# Precharge Time : 4 ** System Hardware Monitor **
EDO DRAM Read Burst : x333 CPU Overheat Alarm (>65
o
C) : Disabled
EDO DRAM Write Burst : x222 CPU Fan Malfunction Alarm : Disabled
System 5V Alarm (<4.7V) : Disabled
DRAM Data Integrity Mode : Non-ECC
CPU-To-PCI IDE Posting : Enabled
System BIOS Cacheable : Disabled
Video BIOS Cacheable : Disabled
Video RAM Cacheable : Disabled
8 Bit I/O Recovery Time : 1
16 Bit I/O Recovery Time : 1
Memory Hole At 15M-16M : Disabled
ESC : Quit
↑ ↓ → ←
: Select Item
Passive Release : Enabled F1 : Help PU/PD/+/- : Mod
Delayed Transaction : Disabled F5 : Old Values (Shift) F2 : Color
AGP Aperture Size (MB) : 64 F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Auto Configuration - When Enabled , pre-defined values for DRAM, Cache, Timings, etc.
are set according to the CPU type & system clock. Enabled is the recommended setting.
These settings are only editable when Auto Configuration is Disabled .
Note: The first chipset settings deal with CPU access to dynamic random access memory
(DRAM). The default timings have been carefully chosen and should only be altered if data
is being lost. Such a scenario might occur if your system had mixed speed DRAM chips