Tekram Technology P6F40-B5 Скачать руководство пользователя

Страница: 32 / 45

MAINBOARD BIOS SETUP

P6F40-B5 User’s Manual

Onboard Primary PCI IDE -

Enables or Disables the primary controller. Situations where

this controller would be disabled are:

a) You are not using any IDE Drives

b) You are

using an add-on IDE controller in a PCI Slot

Enabled

Primary onboard HDD controller used -- (Default)

Disabled

Primary onboard HDD controller not used.

Onboard Secondary PCI IDE

- Enables or Disables the secondary controller. Situations

where this controller would be disabled are:

a) You are not using any IDE Drives

b) You

are using IDE Drives ONLY on the primary controller

c) You are using an add-on IDE

controller in a PCI Slot

Enabled

Secondary onboard HDD controller used

Disabled

Secondary onboard HDD controller not used.

PCI Slot IDE 2nd Channel

- Allows you designate an IDE controller board inserted into

one of the PCI slots as your secondary IDE controller. *

Disabled

(Default).

USB Controller

- Enables or Disables the on-board USB (Universal Serial Bus) controller.

Onboard FDC Controller

- Enables or Disables the on-board Floppy Disk Controller.

Onboard Serial Port 1

- With this option, the on-board Serial Port 1 can be Disabled, or

set to COM1/3F8 (Default), COM2/2F8, COM3/3E8 or COM4/2E8.

Onboard Serial Port 2

- With this option, the on-board Serial Port 2 can be Disabled, or

set to COM2/2F8 (Default), COM1/3F8, COM3/3E8 or COM4/2E8.

InfraRed /COM2 Selected

- By default, this field is set to

UART COM2

, which directs

the second serial port UART to support the COM2 serial port. Choosing

IrDA SIR

SHARP IR

will activate the on-board infrared feature and redirect the second serial port

UART to support the infrared module connector on the mainboard.

Onboard Parallel Port

- With this option, the on-board Parallel Port can be Disabled, or

set to 378/IRQ7 (Default), 3BC/IRQ7 or 278/IRQ5.

Onboard Parallel Mode

- Sets the operating mode of the parallel port. Options are:

Normal, EPP/Normal, ECP

and

ECP/EPP.

ECP Mode Use DMA

- Options are 1 and 3. This field is available only when one of the

two following options in

Parallel Port Mode

is selected: ECP or ECP/EPP.

EPP Version

- Options are 1.7 (Default) and 1.9 (IEEE 1284 compliant).

Содержание P6F40-B5














































Результаты поиска

Содержание P6F40-B5

Отзывы:

Похожие инструкции для P6F40-B5

Бренды по названию

Популярные бренды

Tekram Technology P6F40-B5, Руководство пользователя

Результаты поиска

Содержание P6F40-B5

Отзывы:

Похожие инструкции для P6F40-B5

Бренды по названию

Популярные бренды