INSTALLATION
Installation Guide
15
System Function Connector Block (J7)
Pins [7 & 9] SMI suspend switch lead
- If your system’s case has a suspend
switch, hook the lead from the switch to pins 7 & 9. A suspend switch is used to
save electricity by putting the system into a suspend mode when the computer is
not being used. For this switch to be functional, “
Suspend Mode
” must first be
enabled in the
Power Management Setup
in the BIOS Setup utility.
Pins [17 & 19] Reset switch lead
- Connects to the Reset Switch lead from the
system’s case. The reset switch is used to “cold-boot” the system without actually
turning off the power, reducing wear and tear on the power supply.
Pins [2 & 6] Suspend LED lead
– Pins 2 & 6 connect to the case-mounted
Suspend LED switch.
Pins [14 & 20] Speaker connector
- Connects to the Speaker lead from the
system’s case.
