INSTALLATION
Installation Guide
10
Setting the Jumpers
Jumpers are used on this mainboard to select various settings and features. A 2-pin
jumper has two settings: Open and Short (or Closed). The jumper is closed by
placing the Jumper Cap across the two pins, thereby connecting them. 3-pin
jumpers can be set to pins 1-2 or 2-3 connected. Pin-1 is labeled on the circuit
board.
3-pin Jumper
2-pin Jumper
Pin 1-2
Open
Pin 2-3
Short
CPU Clock Selection Jumper (JBF0-2 and JFS0-3)
After installing the CPU, you must set the clock selection jumpers to match the
frequency of the CPU. Find the Jumper Blocks labeled JBF0-2 and JFS0-3. Set the
jumpers according to your particular CPU type (a list of current available CPU
settings is provided on the following page).
