Teknoware TKT6716C, Инструкция по установке и обслуживанию

Страница: 33 / 56

VOT 2; Rev 1.2; EN; 09.07.2013
TKT67C
– Installation and maintenance
33
8.1.2 LCD content
If the LCD has not been configured, it will display the status screen shown below. In a few minutes, it
will receive configuration data from the central battery system, with the exception of luminaire circuits.
??.??.???? ??:??
System status
Voltage level xV
Charge current xA
Figure 1. LCD not yet configured
The first row shows the date and time in format: dd.mm.yy.hh.min. The date and time are provided by
the central battery system; alternatively, they can be manually set on the LCD.
The second row shows the status of the central battery system.
NOTE: For error code explanations, please refer to the error log. See chapter 8.1.6 Error log .
The third row shows the voltage level of the battery set. The fourth row shows the battery set charge
and discharge currents.
Figure 2. LCD after having received configuration data from the central battery system
8.1.3 LCD menu tree
When you press the SETUP button, the LCD menu tree is displayed. You can browse the menu by
pressing the +/- buttons. You can select four separate submenus from the menu. The submenus are
shown in Figure 3.
The luminaire test log contains a two-year test memory, or, alternatively, the test memory of the latest
730 tests.
The battery test log contains a two-year test memory, or, alternatively, the log of the latest 256 tests.
The error log contains entries for the latest 42 errors.
You can use the SETUP button to change the date and the time of the day, as well as start a
luminaire/battery test.
Figure 3. Main menu
8.1.4 Test history
When you select Browse luminaire tests , the display below is shown.
Luminaire test log
23.03.11 23:59 OK
22.03.11 23:59 ERROR
Figure 4. Luminaire test log
23.03.2011 10:30
System status OK
Voltage level 243V
Discharge current 1.0A
Browse luminaire tests
Browse battery tests
Browse error log
Setup