Teknoware TKT6716C, Инструкция по установке и обслуживанию

Страница: 8 / 56

VOT 2; Rev 1.2; EN; 09.07.2013
TKT67C
– Installation and maintenance
8
Output circuit fuses: 5x20 mm sand-filled glass tube fuse 2,5 A
Output connector: max. wire 4 mm
2
Required short-circuit
current with 2.5 A fuse 0,4 s.
tripping time: 10 A
Battery Fuse:
TKT6716Cxx - TKT6756Cxx: 2x35 A plug fuse S 35 A/250 V Neozed
Charging circuit fuses: 5x20 mm glass tube fuse 6,3 A
Central battery unit
type Output circuits Total load capacity in battery use with
1-hour and 3-hour operating time
TKT6716C(N) 2x
(8x350W/ 4x700W/2x1,400W)
or 2,5A circuit, Max. 5,600VA
1 h 5,600 W 18x38 Ah
3 h 5,600 W 18x65 Ah
TKT6724C(N) 3x
(8x350W/ 4x700W/2x1,400W)
or 2,5A circuit, Max. 8,400VA
1 h 8,400 W 18x38 Ah
3 h 8,400 W 18x65 Ah
TKT6732C(N) 4x
(8x350W/4x700W/2x1,400W)
or 2,5A circuit, Max. 11,200VA
1 h 11,200 W 18x65 Ah
3 h 11,200 W 18x65 Ah
TKT6740C(N) 5x
(8x350W/4x700W/2x1,400W)
or 2,5A circuit, Max. 14,000VA
1 h 14,000 W 18x65 Ah
3 h 14,000 W 18x65 Ah
TKT6748C(N) 6x
(8x350W/4x700W/2x1,400W)
or 2,5A circuit, Max. 16,800VA
1 h 16,800 W 18x65 Ah
3 h 16,800 W 18x65 Ah
TKT6756C(N) 7x
(8x350W/ 4x700W/2x1,400W)
or 2,5A circuit, Max. 19,600VA
1 h 19,600 W 18x65 Ah
3 h 19,600 W 18x65 Ah
The central battery unit is equipped with a distribution fuse in the connecting terminal and with battery
circuit fuses. The output circuits’ fuses are on the top end of casing at connectors 1-2.
For more information, see chapter 5.2.1 Parts layout
The charging system of the central battery unit is equipped with a temperature compensation of the
battery charging voltage, which is approximately 0.06 V/°C (5 mV/°C/cell).
NOTE: The luminaires used with the central battery unit must be suitable for both AC and DC supply,
and according to EN 60598-2-22.