Teknoware TAPSA CONTROL TKT65, Инструкция по установке и обслуживанию

Страница: 36 / 53

VOT 34; Rev 1.81; EN; 11.12.2019
TKT65C
– Installation and maintenance
36
The condition of the output circuits is checked only before the tests. The circuit voltages are checked at this
time with an open and closed output circuit. Empty circuits are not inspected in this case either. An output
circuit error results in an internal error alarm.
In circuit monitoring the LEDs of the front panel and in the report the corresponding circles show the strength
of the current of the circuit. The stronger the current of the circuit, the higher the LED column.
The LED column grows higher starting from down to upwards.
APPENDIX 2: Mechanical dimensions
TKT65
: