Section:
Description:
Page No:
Date:
CONNECT LEGS
DETAIL 1
INSTALL TABLE TOP
DETAIL 2
COM_101a
2 of 3
Sept 2017
HEIGHT ADJUSTABLE TABLE - INCREMENT
HEIGHT ADJUSTABLE TABLES (COMPLEMENTS)
3.5"
E
D
G
F
A
B
C
STEP 1: Connect Legs with Leg Connecting Bar. Secure with hardware.
NOTE:
When using existing worksurface, center Legs leaving the same distance from left and
right, and make sure the distance from the back or the worksurface to the bask edge of the
brackets equals 3.5".
STEP 2: Place Table Top on clean surface up side down. Rotate connected Legs and place
them on the surface of Table Top using pilot holes for placement. Fasten with wood screws.
