STEP 7: Tighten Thumb Screws
STEP 8: Place Swerv Arm(s) as shown above.
STEP 10: Install Monitor Assembly onto the Swerv Arm.
STEP 9: Install VESA Plate with Thumb Screws provided as shown above.
Section:
Description:
Page No:
Date:
TIGHTEN THUMB SCREW
ASSEMBLY ARM ASSEMBLIES
INSTALL VESA PLATE
INSTALL MONITOR
COM_218a
4 of 7
Jan 2020
DESK EDGE MOUNT ASSEMBLY
SWERV MONITOR MOUNT ASSEMBLY
NOTE: For Dual,
do this step for
both Screws.
OR
NOTE: Single Arm
NOTE: Dual Arm
NOTE: For Dual,
do this step for
both Monitors.
NOTE: For Dual,
do this step for
both Monitors.
C1
C1
D
D
E
F
