Section:
Description:
Page No:
Date:
ARM COUNTERBALANCE LOAD ADJUSTMENT
CABLE MANAGEMENT
COM_210d
5 of 7
Sept 2017
MAST DYNAMIC ARM - EXPANSION MOUNT
ERGONOMICS AND ACCESSORIES
NOTE: Lead cables
into the Clip before
clipping to Stanchion.
N
Arm Wire Clip
Cable Management Clip
Underside View
NOTE: Rotate Allen Key to "+"
direction for heavier monitor, "-"
direction for lighter monitor. Stop
until Arm stabilized at one position.
Dynamic Arm supports from 8 to
30lbs.
Dynamic Arm Light supports from
2 to 13lbs.
STEP 8: Insert Cable in Arm Wire Clip located under Dynamic Arm. Squeeze Cable
management Clip on both sides to release it, drop cable on it then put it back. Lead cables into
Stanchion Clip, then insert it to the back of Stanchion.
STEP 7: Hold arm in desired position, adjust the Spring Loaded Counterbalancing Load on top
of Stanchion Hub until Arm stabilize at the position.
