Teknim VAP Series, Руководство пользователя

Страница: 24 / 36

BD-1/07-002 23
14.4. Bypassed Zones
Bypassed zones and partitions begin flashing (If available). Keypad returns to stand
by position after 5 seconds. In VPC301 keypad, you will see the bypassed zones on
the LCD.
14.5. Troubles
If there is a trouble on your system, “trouble” light is “ON”.
For VPC104 Keypad:
You will see “t” letter than a code for each trouble. Look at the following table to learn
type of trouble.
Arıza Kodu Anlamı
t1 Power loss or mains failure.
t2 Low battery.
t3 Time and date must be entered (Set time and date)
t4 Telephone line failure
t5 Zone failure
t6 Battery failure.
t9 Zone 1 open-circuit
t10 Zone 1 short-circuit
t11 Zone 2 open-circuit
t12 Zone 2 short-circuit
t13 Zone 3 open-circuit
t14 Zone 3 short-circuit
t15 Zone 4 open-circuit
t16 Zone 4 short-circuit
t17 Zone 5 open-circuit
t18 Zone 5 short-circuit
t19 Zone 6 open-circuit
t20 Zone 6 short-circuit
t21 Zone 7 open-circuit
t22 Zone 7 short-circuit
t23 Zone 8 open-circuit
t24 Zone 8 short-circuit
C There is no communication between keypad and panel
For VPC016, VPC104, VPC108, VPC116 and VPC132 keypads;
“Trouble” and some other lights flash together to display trouble type. Look at the
following table to learn type of trouble.

[Press] (Report) key long until you hear long beep.

[Press] key.

[Press] (Report) key long until you hear long beep.

[Press] key.

[Press] (Report) key long until you hear long beep.

[Press] key.