BD-1/07-002
8
Zone Lights:
In VPC016, VPC108, VPC116 and VPC132 keypads, numerical
leds are designed to show the status of the zones in your system.
If a zone light is “OFF”, the corresponding zone is closed. If a zone
light is “ON”, the corresponding zone is open (open door,
movement detected...etc). In VPC104 keypad, you can see the
opened zone in 7 segment LED screen. In VPC301 keypad, the
opened zones can be seen in Alphanumeric LCD screen.
Status Lights:
Status lights are same in all VAP series keypads (VPC016,
VPC104, VPC108, VPC116, VPC132 and VPC301) designed to
show
status of your alarm system. If ready light is “ON”, your
alarm system is ready to arm. When you armed the system
successfully, “armed” light will be “ON”. If there is a trouble,
“trouble” light will be “ON”. “Fire” led will be “ON”, if there is a fire
alarm.
Number Pads and Function Buttons:
Besides normal number pad feature, these buttons provide you
some functions to control your system easily. Each button has a
second function. To activate second function of the buttons, press
long related button until you hear a long beep. Look at the following
table to get detailed information about the functions of number pad.
Button
Main Function
Secondary Function
1
“1”
Panic.
2
“2”
Fire.
3
“3”
Duress.
4
“4”
Program
– To enter programming mode.
5
“5”
Bypass.
6
“6”
Report.
7
“7”
Chime
– To open/close chime function.
8
“8”
Test.
9
“9”
Memory
– To display event log.
0
“0”
Reset
– To disarm fire alarm.
X
Cancel
Exit.
√
OK
Password
– To change code.
Partition and Arrow Keys*:
These keys are designed to allow you to control partitions of your
system. By pressing these keys, you can arm/disarm the required
partitions easily. There are also second functions of the keys as you
can see on the figures of related keys. A key is for indoor
arming/disarming, B key is to arm windows, C key is to arm doors
and D key is for outdoor arming/disarming. In order to use second
function of these keys, SPT (Smart partition technology)** must be activated.
*
These keys are not active in VAP2xx and VAP3xx alarm panel since there is no partition.
**
Please contact your installer for detailed information.
Содержание VAP Series
