117-0815-0026
12" COLE, COLE and MINI COLE JAWS:
Codes: 6040, JSCOLE & 6006
SAFETY
Consult the safety section of this jaw manual and also read the safety section of your
Chuck manual and be thoroughly familiar with the safety operation before using these
jaws.
PARTS PROVIDED:
4 Die cast Cole Jaw Segments
8 M6x20 Countersunk Screws
8 M6x16 Cheese Head (Slotted) Screws
8 Cole Jaw Rubbers
IMPORTANT INFORMATION!!!
METHOD OF FITTING FOR FIRST TIME USE
NOTE:
EXTREME CARE SHOULD BE TAKEN. The locator ring on the back of the
Cole Jaws provides the accuracy of location. Care must be taken that this locator
ring is not damaged when the jaws are placed in the jaw slides.
1. With the chuck body flat on a bench, carefully place each Cole Jaw segment
in line with the holes.
2. Start screws so they have just begun to engage in threaded holes of the jaw
slides. Remember to first lightly oil or grease screws under heads before use
to prevent screws from locking onto jaw.
3. Gently rock the Cole Jaw segment from side to side until the locator ring on
the jaw segment is eased properly in the groove of the jaw slide. Look under
