117-0815-00212
Assembly:
1.
Align the Extension Accessory with the Cole Jaw, placing tabs on the
Extension in the grooves on the back side of the Cole Jaw as shown in Fig.
1.Take care to ensure that all the threaded holes on the extension
(indicated by arrows in Fig. 1) are properly aligned behind the through
holes in front.
2.
Begin threading all of the included screws in their respective holes. To help
prevent cross-threading, do not tighten any of the screws all the way down
until all screws have been started into the holes.
3.
Fully tighten the screws, and ensure the Extension Accessory is securely
fastened to the Cole Jaw.
4.
Repeat for remaining Extension Accessory pieces.
