IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
RELEASE DATE
8-14-17
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.tekaillumination.com • [email protected]
REFERENCE NUMBER
INS-2615-00
1.
Mount fixture onto suitable enclosure according
to designed lighting plan. Use locknut to secure.
2. Make watertight connections from remote
driver to fixture leads using waterproof wire
connectors (By Others).
See wiring diagram.
Standard Fixture Installation
Aiming
1. To aim vertically, loosen the lamp head adjustment
screw using a 5/32” Allen wrench, adjust as needed,
then secure aiming position by tightening lamp
head adjustment screw.
Do not rotate more than 360 degrees to avoid
wire damage.
LINE
+
LED
COM
Remote
Driver
-
WIRING DIAGRAM
LIBERTY FLOODLIGHT™ (LBF)
Must install to a suitable enclosure.
2. To aim horizontally, loosen two (2) #8-32 set screws
using 5/64” Allen wrench. Adjust horizontal aim,
then secure aiming position by tightening set
screws.
Do not rotate more than 360 degrees to avoid
wire damage.