Teka 1199300, Инструкции по установке и рекомендации по использованию и обслуживанию

Страница: 20 / 152

GB
ath the under part of the stovetop.
Electrical connection
Before you connect the stovetop to the
mains, check that the voltage and fre-
quency match those specified on the
stovetop nameplate, which is under-
neath it, and on the Guarantee Sheet,
or if applicable on the technical data
sheet, which you must keep together
with this manual throughout the pro-
duct's service life.
Ensure that the inlet cable does not
come into contact with the induction
top housing or the oven housing, if it is
installed in the same unit.
Warning:
The electrical connection
must be properly grounded, follo-
wing current legislation, otherwise
the induction hob may malfunction.
Unusually high power surges
can damage the control system (like
with any electrical appliance).
It is advised to refrain from
using the induction hob during the
pyrolytic cleaning function in the
case of pyrolytic ovens, due to the
high temperature that this type of
device attains.
Only the TEKA official techni-
cal service can handle or repair the
appliance, including replacement of
the power cable.
Before disconnecting the hob
form the mains, we recommend
switching off the cut-off switch and
waiting for approximately 25
seconds before disconnecting from
the mains. This time is required to
allow for the complete discharge of
the electronic circuitry and thus
preclude the possibility of electric
shock from the cable terminals.
Keep the Guarantee
Certificate or the technical data she-
et together with the instructions
manual throughout the product's
service life. These contain impor-
tant technical information.
Use and
Maintenance
User instructions
of the Touch Control
HANDLING ELEMENTS (fig. 2)
On/off touch key.
Hotplate signaller.
Power and/or residual heat displays*.
Hotplate selection touch keys.
Decimal point for the clock*.
Clock touch key.
Clock indicator.
Locking touch key for the rest of
touch keys.
Decimal point of the power and/or
residual heat indicators*.
Lock activated display*.
“Minus” power/time reduction touch
key.
“Plus” power/time increase touch
key.
* Only visible while running.
The manoeuvres are done by means of
the touch keys. You do not need to exert
force on the desired touch key, you only
need to touch it with your fingertip to
activate the required function.
Each action is verified by a beep.
If one or several touch keys remain
pressed for more than ten seconds,
the hob will automatically switch off for
safety reasons and the beep alarm will
go off as a warning of the possible
danger situation.
SWITCHING ON THE DEVICE
1 Touch the On touch key (1) for at
least one second. The touch control
fig. 2
green-yellow
blue
brown
grey
black
green-yellow
blue
brown
grey
black
green-yellow
blue
brown
grey black
green-yellow
blue
brown
grey
black
green-yellow
blue
brown
grey black
DO
NOT
USE
L3
fig. 1
1
2
3
4
6
7
8
9
10
5
11
12
20