Smart active foam generator
i
foam
29-32
troubleshooting guide
Does not foam or the foam
is not of good quality
The machine does not turn
on
The electrical panel
protection is tripped
Liquid flow shut off at the lance
handle
Page 19 and 23
Page 16-20
Page 10 and 11
Page 16
Page 27
Page 9
Page 27
Page 27
Page 27
Page 27
Pull the pistol grip trigger
Bad hose connections
Connect the hoses correctly
Foam mode not active
Press the foam button on the control panel
The equipment has now electricity
supply
Check the mains voltage
Malfunction in the electrical
components of the equipment
Contact Teinnova technical service
Water intake pressure too low
Check that the mains water inlet indicator is
green
The internal compressor does not
start
Electrical short
Contact Teinnova technical service
Contact Teinnova technical service
Incorrect chemical dosage
Contact Teinnova technical service
The internal pump does not work
Contact Teinnova technical service
problem
possible cause
solution
query
The machine does not do
anything
Page 17
Page 9
Emergency stop activated
Reset the emergency stop button
Water pressure less than 0.1 bar
Connect to a supply with a higher pressure