Smart active foam generator
i
foam
17-32
The IFOAM has a safety system for high inlet water temperature. If the water temperature is above 60
o
C, it
may cause faults in the equipment’s internal components.
Therefore the equipment will go into hibernation mode, it will not operate and it will display a high water
temperature warning on the control screen.
operating instructions
Steps for a correct ifoam installation:
Inlet temperature control:
3
The inlet temperature of the mains water must be
no higher than 60
o
C.
The equipment will become active again and operate correctly when the inlet water temperature falls below
60 degrees and the reset button is pressed.
