Ultrasonic cleaning equipment
pg. 14
Filnet B300 ultrasonic
operating instructions
Operation steps :
3
1- Connect the control board’s power port to the 24V switching power supply (note the positive and nega-
tive directions).
After setting the heating temperature, ultrasonic working time, power percentage, and the communication
address of the control board, start the ON/OFF button to start the ultrasonic work. At the same time, press
the HEAT ON/OFF button to turn on the cleaning tank heating.
2- When there are too many bubbles in the cleaning tank, press the DEA button to activate the degassing
function of the ultrasonic wave.
