pg. 11
Ultrasonic cleaning equipment
Filnet B300 ultrasonic
Control panel:
Ultrasonic ON/OFF button:
The ultrasonic start/stop button, when this button is pressed, the
ultrasonic generator starts to work and the working light on, pressing this button again, the ultrasonic
stops working and the working light goes out.
Degas button:
Ultrasonic degassing button, press this button, the ultrasonic generator begins to
enter the degassing working state, the Degas light on; press this button again, the degassing stops
working, and the Degas light goes out. When degassing starts, power regulation is ineffective.
UP button:
Press this button, if in TEMP SET mode, set the heating temperature increase; if in TIME
mode, the ultrasonic working time increases; if in GEN POWER mode, the ultrasonic power percen-
tage increases. Press this key for three seconds to enter the setting of the number of communication
generators. The address of the local control generator is A1-A6. For example, when set to A5, the
controller can control the operation of 5 generators at the same time.
3
operating instructions
Temperature setting
Temperature display
Time setting
Ultrasonic ON/OFF
Degas button
Ultrasonic power percen-
tage setting 0-100%
Heating ON/OFF
Heating indicator
Working indicator
Time display
Increase switch
Degassing indicator
Percentage of the
ultrasonic power
Warning indicator
Decrease Switch
