14-
via menu.
By linking the units in master/slave connection, the first unit will control the other units to
give an automatic, sound activated, synchronized light show. This function is good when
you want an instant show. You have to select show (show 1, 2, 3, 4) modes for the first unit
(master). Its DMX input jack will have nothing plugged into it, and Its master LED will be
constantly on and sound LED will flash to the music. The other units will have to set in
slave mode
and select
(normal) or
(2 light show) mode, Their
DMX cables plugged into the DMX input jacks (daisy chain) and the slave LED lights will
constantly on.
In
(slave mode),
means the unit works normally and
means
2-light show. In order to create a great light show, you can set
on the second unit
to get contrast movement to each other, even if you have two units only.
The easy remote control is used only in master/slave mode. By
connecting to the 1/4” microphone jack of the first unit, you will find
that the remote control on the first unit will control all the other units
for Stand by, Function and Mode.
Stand by
Blackout the unit
Function
Strobe
1. Color sync. strobe
2. Sync. strobe
3. Two-light strobe
X/Y moving show pattern
selection
( Show 1 ~ S how 4 )
P lease refer to 4.2. Main
Functions- Show mode
Gobo/Color selection
1.Hold
on
for
gobo
selection
2.P ress for color change
X/Y moving setting
1.Macro(sound active)
2.Fade (sound invalid)
Mode
Sound 1
(LED off )
S ound 2
(LED slow blinking)
Slow/Sound 3
(LE D on)
P osition/ Latch
(LED fast blinking)
If you use a universal DMX controller to control the units, you have to set DMX address
from 1 to 512 channel so that the units can receive DMX signal.
Press the
button up to when the
is shown on the display. Pressing
button and the display will blink. Use
and
button to change the DMX512
address. Once the address has been selected, press and keep
button pressed up
to when the display stops blinking or storing automatically 8 seconds later. To go back to
15-
the functions without any change press the
button again.
Please refer to the following diagram to address your DMX512 channel for the first 4 units.
2-light show
5.2. Easy Controller
5.3. DMX Controller
MENU
ENTER
DOWN
UP
ENTER
MENU
5.4. DMX 512 Configuration
