TEFAL Mini Control, Руководство пользователя

Страница: 15 / 136

13
For a child, a burn or scald, even if slight, can sometimes be serious.
As they grow up, teach your children to beware of hot liquids to be found in the kitchen. Position
the kettle and its supply cord well to the rear of the work surface, out of the reach of children.
If
an accident does occur
, run cold water over the scald immediately and call a doctor if
necessary.
•
In order to avoid any accident: do not carry your child or baby at the same time as drinking or
carrying a hot drink.
IN THE EVENT OF PROBLEMS
THERE IS NO EVIDENT DAMAGE TO YOUR KETTLE
• The kettle does not work
– Check that your kettle is properly connected.
– The kettle has been switched on without water or an accumulation of scale has caused the
overheat cut-out to operate: allow the kettle to cool and fill it with water. Descale first if scale
has accumulated.
Switch it on: the kettle should start working again after about 15 minutes.
IF YOUR KETTLE HAS BEEN DROPPED, IF IT LEAKS OR IF THERE IS VISIBLE DAMAGE TO THE
POWER CORD, THE PLUG OR THE BASE OF THE KETTLE
Return your kettle to your After-Sales Service Centre, only they are authorised to carry out repairs.
See the guarantee conditions and list of centres in the booklet supplied with your kettle. The
type and serial number are indicated on the base of the kettle’s body. This guarantee covers
manufacturing defects and domestic use only. Any breakage or damage resulting from failure to
comply with the instructions for use is not covered by the guarantee.
• The manufacturer reserves the right to modify the characteristics or components of its kettles at
any time in the interests of the consumer.
• Do not use the kettle. No attempt must be made to dismantle the kettle or its safety devices.
• If the supply cord is damaged, it must be replaced by the manufacturer, its after-sales service
centre or a similarly qualified person, in order to avoid any danger.
PREVENTION OF DOMESTIC ACCIDENTS
• Empty your kettle and rinse 5 or 6 times. Repeat if necessary.
To de-scale your filter:
Soak the filter in white vinegar or diluted citric acid.
• Never use a de-scaling method other than that recommended.
EN