TEFAL HOME CHEF Smart Pro IH, Руководство пользователя

Страница: 23 / 80

23
EN
Problem Possible reasons Solutions
Continuous pressure
release from float valve
Residue in the float valve.
Clean and remove the
residue.
Float valve is stuck.
Clean and remove the
residue.
The limit valve releases
pressure discontinuously
during cooking progress.
Make the temperature in the
pot more even.
Normal.
“E0” displayed on digital
screen. Top sensor is in short circuit or
open circuit. Send to repair and
maintenance department.
“E1” displayed on digital
screen. Bottom sensor is in short
circuit or open circuit. Send to repair and
maintenance department.
“E2” displayed on digital
screen.
The lid is not in the position
defined for the selected
cooking mode.
Please refer to the cooking
table to check the right
position of the lid for the
program you have selected.
Lid switch sensor does not
function. Send to repair and
maintenance department.
“E4” displayed on digital
screen.
IGBT NTC does not function.
Send to repair and
maintenance department.
“E5” displayed on digital
screen. Temperature of IGBT is too
high.
Check whether the air inlet
and outlet is blocked by
residues or dirts. If yes, clean
and remove the residues
or dirts; If not, send to
repair and maintenance
department.
“E10” displayed on digital
screen.
No cookware Put on the right cookware.