TEFAL HOME CHEF Smart Pro IH, Руководство пользователя

Страница: 22 / 80

22
TECHNICAL TROUBLESHOOTING GUIDE
Problem Possible reasons Solutions
Unable to open lid
Unable to open because of
pressure in the cooking pot.
Wait for the pressure in the
pot to be completely released
automatically.
Pressure in the pot is fully
released but the float valve is
stuck because it is too dirty,
and therefore unable to fall.
a. Once the product has
cooled down, press the
external part of the float
valve. -Fig 36
b. For next use, please clean
and wipe the float valve.
-Fig. 35
Unable to close lid
Hot pot with steam inside. Wait for the pot to be cool.
The sealing gasket was not
properly installed. Install the sealing gasket
properly.
The float valve is stuck
because it is too dirty, and
therefore unable to fall.
a. Once the product has
cooled down, press the
external part of the float
valve.
b. For next use, please clean
and wipe the float valve.
-Fig. 35
Direction at which lid was
closed is incorrect.
Close lid in the correct
direction according to the
instruction manual.
Food is uncooked.
Rice : water ratio is incorrect.
Use the required rice : water
ratio.
No electricity from the power
grid.
Check the electric circuit.
Steam leakage from lid
Sealing gasket is broken.
Send to repair and
maintenance department.
Residue in the sealing gasket.
Clean and remove the
residue.
The sealing gasket was not
properly installed. Install the sealing gasket
properly.
Intense release of
pressure from pressure
limit valve
Faulty pressure control
resulted in release of pressure. Send to repair and
maintenance department.
Pressure limit valve did not
fall into place.
Carefully rotate/press the
pressure limit valve to make
it fall into place.