User Guide - 2.8 Mixer
Teenage Engineering
– User Guide (LD)
Janvier 2019
27/59
2.8.4 Mute groups
Mute groups allow you to store different mute configurations. Each project holds 10 mute
groups. Use the
“value keys”
1
–0
to select which mute group to be active. The active mute
group is stored per pattern.
2.8.5 Mute audio
By default, muting a track will stop any notes from being triggered. However, it is possible to
mute only the audio signal sent to the master bus. The track will still output midi and audio
signal to the effect and tape tracks.
To do this, while holding the
MIXER
button, press the
SHIFT
key.
The SHIFT key will light red.
Now when muting tracks they will turn red when muted.
This will mute only the track audio but not the outgoing MIDI.
Pro-tip: you can mix and match the two mute types, and store these settings across multiple
mute groups.
2.8.6 Mixer + app
When paired with the OP-Z app, holding
MIXER
will display the mixer page.
The mixer page gives an overview of your track levels. On this page it is possible to adjust the
faders with your fingers much like a traditional mixing desk.
The buttons below the faders allow you to mute / unmute tracks. When muted the fader will be
greyed out.
