User Guide - 2.2 Interface overview
Teenage Engineering
– User Guide (LD)
Janvier 2019
10/59
2.2.4 Parameter pages
Each track can have up to 4 pages of parameters.
Each page is color coded so you always know what you're controlling.
Learning these colors will help you to navigate the interface and to find the setting you want.
Press and release
SHIFT
to toggle parameter page.
See chart § 2.4.3 au-dessous for detailed info
2.2.5 Track select button
Use the TRACK select button or
just “tracks” 1-16 to select which
track is active
Press TRACK + any of the “tracks” 1-16 buttons to select that
track
The currently selected track is indicated by a “
white LED
”1-16
when track is held
See the
“track” chapter § 2.5 au-dessous for more information.
2.2.6 Tracks / patterns / step buttons
The 16 top row buttons act both as “tracks”
buttons, as “pattern select” buttons and as
“steps” in the sequencer
The functionality depend on what button
combination you are pressing
Holding PROJECT will
allow you to select
patterns, while
holding TRACK will
allow you to select
track
Pressing them alone
will place a trigger on
a step in the
sequencer
2.2.7 Record button
The record button,
REC
, is used for recording events into the sequencer.
Read about the different ways to record here § 2.3.6 au-dessous.
2.2.8 Transport buttons
Play
Press PLAY to start
playback from the
start of the active
pattern. While playing
Stop
Press STOP while the
sequencer is playing to
stop playback
Panic
Press STOP while
sequencer is stopped to
end all active notes
Super Panic
Pressing STOP twice
while sequencer is
stopped will also
