Maintenance (Continued)
Cable 3 is the yellow cable.
Cable 1 gave both highest and
intermediate readings.
Cable 1 is the red cable.
Cable 2 is the black cable.
The actual ohm values are not
important. The method works regard-
less of the actual ohm readings; what
matters is which reading is highest,
which intermediate, and which lowest.
Important Electrical
Grounding Information
Hazardous
voltage. Can
shock, burn, or kill. To reduce the risk of
electrical shock during pump operation,
ground and bond the pump and motor
as follows:
1. To reduce risk of electrical shock
from metal parts of the assembly
other than the pump, bond
together all metal parts accessible
at the well head (including metal
discharge pipe, metal well casing,
and the like). Use a metal bonding
conductor at least as large as the
power cable conductors running
down the well to the pump's
motor.
2. Clamp or weld (or both if
necessary) this bonding conductor
to the grounding means provided
with the pump, which will be the
equipment-grounding terminal, the
grounding conductor on the pump
housing, or an equipment-
grounding lead. The equipment-
grounding lead, when provided,
will be the conductor having green
insulation; it may also have one or
more yellow stripes.
3. Ground the pump, motor, and any
metallic conduit that carrys power
cable conductors. Ground these
back to the service by connecting a
copper conductor from the pump,
motor, and conduit to the
grounding screw provided within
the supply-connection box wiring
compartment. This conductor must
be at least as large as the circuit
conductors supplying the pump.
SAVE THESE INSTRUCTIONS.
Models 4P847A thru 4P851A, 4P852 thru 4P865, 4RH01 thru 4RH06,
4RG76 thru 4RG84, 4RG94 thru 4RG97 and 4RG99
13
Teel Operating Instructions and Parts Manual
®
E
N
G
L
I
S
H
1600
1250
1000
750
500
250
0
.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5
PUMP
SETTING
(FEET)
#14 CABLE
#12 CABLE
#10 CABLE
#8 CABLE
#6 CABLE
#2 CABLE #4 CABLE
#0 CABLE
Figure 18 - Total resistance of drop
cable (OHMs)
Limited Warranty
DAYTON 18-MONTH LIMITED WARRANTY.
Teel
®
deep well submersible pumps, Models covered in this manual, are warranted by Dayton Electric Mfg. Co.
(Dayton) to the original user against defects in workmanship or materials under normal use for eighteen months after date of purchase. Any part which is
determined to be defective in material or workmanship and returned to an authorized service location, as Dayton designates, shipping costs prepaid, will be, as
the exclusive remedy, repaired or replaced at Dayton’s option. For limited warranty claim procedures, see PROMPT DISPOSITION below. This limited warranty
gives purchasers specific legal rights which vary from jurisdiction to jurisdiction.
LIMITATION OF LIABILITY.
To the extent allowable under applicable law, Dayton’s liability for consequential and incidental damages is expressly disclaimed.
Dayton’s liability in all events is limited to and shall not exceed the purchase price paid.
WARRANTY DISCLAIMER.
Dayton has made a diligent effort to provide product information and illustrate the products in this literature accurately; however,
such information and illustrations are for the sole purpose of identification, and do not express or imply a warranty that the products are MERCHANTABLE, or
FIT FOR A PARTICULAR PURPOSE, or that the products will necessarily conform to the illustrations or descriptions.
Except as provided below, no warranty or affirmation of fact, expressed or implied, other than as stated in the “LIMITED WARRANTY” above is made or
authorized by Dayton.
PRODUCT SUITABILITY.
Many jurisdictions have codes and regulations governing sales, construction, installation, and/or use of products for certain purposes,
which may vary from those in neighboring areas. While Dayton attempts to assure that its products comply with such codes, it cannot guarantee compliance,
and cannot be responsible for how the product is installed or used. Before purchase and use of a product, review the product applications, and all applicable
national and local codes and regulations, and be sure that the product, installation, and use will comply with them.
Certain aspects of disclaimers are not applicable to consumer products; e.g., (a) some jurisdictions do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you; (b) also, some jurisdictions do not allow a limitation on how long an implied
warranty lasts, consequently the above limitation may not apply to you; and (c) by law, during the period of this Limited Warranty, any implied warranties of
implied merchantability or fitness for a particular purpose applicable to consumer products purchased by consumers, may not be excluded or otherwise
disclaimed.
PROMPT DISPOSITION.
Dayton will make a good faith effort for prompt correction or other adjustment with respect to any product which proves to be
defective within limited warranty. For any product believed to be defective within limited warranty, first write or call dealer from whom the product was
purchased. Dealer will give additional directions. If unable to resolve satisfactorily, write to Dayton at address below, giving dealer’s name, address, date, and
number of dealer’s invoice, and describing the nature of the defect. Title and risk of loss pass to buyer on delivery to common carrier. If product was damaged in
transit to you, file claim with carrier.
Manufactured for Dayton Electric Mfg. Co., 5959 W. Howard St., Niles, Illinois 60714 U.S.A.
