35
34
4
35
CONTENTS
1. Safety precautions
2. Parts supplied
2.1 Parts supplied.
3. Activities prior to the installation of the air conditioner.
4. Positioning of the indoor and outdoor unit.
4.1 Positioning of the indoor unit.
4.2 Positioning of the outdoor unit.
5. Possible options for installing the piping from the inside unit to the outside
unit.
6. Mounting the installation plate and drilling holes for piping.
6.1 Mounting the installation plate of the indoor unit.
6.2 Drilling holes for piping, condensed water hose and power cable.
7. Connecting the refrigerant piping.
7.1 Connecting the refrigerant piping.
8. Connecting the condensed water drain.
8.1 Connecting the condensed water drain of the indoor unit.
8.2 Connecting the condensed water drain of the outdoor unit.
9. Electrical installation.
10. Connecting the power cables.
10.1 Connecting the power cables.
11. Vacuuming the cooling system.
12. Checking the leak tightness of the cooling system.
13. Adding refrigerant with pipe lengths over 5 meter.
14. Test run after installation.
4
34
IMPORTANT NOTE:
Install this device only when it complies with local/national legislation, regulation and standards. This pro-
duct is intended to be used as an air conditioner in residential houses and is only suitable for use indoors
in dry locations, in normal household conditions, like living rooms, kitchens, and garages. This device is
suitable exclusively for earthed sockets, connection voltage 220-240 V~/ 50 Hz.
This manual is intended for persons with sufficient knowledge and experience with electrical devices, elec-
tronics, cooling technology and mechanical installations. Attempting to install or repair the device can cause
injuries and damaged properties. The manufacturer neither the vendor is responsible for the interpretation
of this information, and shall not be liable for the inefficient use of this information.
The information, specifications and parameters can be changed as a result of technical modifications or
improvements, without prior notice. The correct specifications are specified on the identification plate.
• Read this installation manual carefully before installing the product.
• A damaged power cord may only be replaced by qualified personnel.
• This device may only be installed in compliance with the applicable national and European require-
ments and by authorised personnel. The guarantee is invalid for damage caused by neglect or actions
that deviate from those in the user manual.
• Always wear appropriate personal protective equipment like goggles, face mask, ear protection, gloves
etc.
Internet:
In order to provide a better service, you can download the latest version of the user, installation, or service
manual at pvg.eu.
G
WARNING!
Don’t install, remove or reinstall the device yourself if you don’t have the required knowledge
or authorisation regarding electricity, electronics, cooling technique or mechanical installation.
• Improper installation can lead to water leakage, electrical shocks, refrigerant leakage or
fire.
Refer to an authorised dealer or air conditioning specialist for the installation.
Attention: Malfunctions caused by improper installation are not covered by the guarantee.
• The unit has to be installed in an easy accessible place. All extra costs for renting special
equipment for servicing the unit are at the expense of the client.
Содержание 8713508778433
Страница 58: ...115 114 115 114...
