V2.1 | 11-2022 Installation and Commisioning of Tankspion-IoT devices
7
5
6
Blackout Detection with Device Combination
“Tankspion-IOT PRO/ GPS“ with “LX-Device"
•
Connection: Connect the supplied 2 wire signal cable with white to terminal
5V-IN and brown to terminal GND.
Connect the other side to the PIN-bar X-2 of the LX-2-R device.
Alternatively you could connect a 5V power supply.
(5V not present => remote signalling of power failure).
7
Connection of the Level Probe with Device Combination
'Tankspion-IOT PRO/ GPS' with 'LX-Device'
Loop-Measurment with the TECSON tank content measuring devices:
Connnect the measuring probe with its 2 wire signal cable to the Tankspion-IoT (Pro/GPS)
•
red to terminal 'P+'
•
black to terminal 'P-'
Additionally, make a 2-wire line connection from the Tankspion-IoT to the LX device:
•
LX (+) to the LX device on input terminal 1
•
LX (-) to the LX device on input terminal 2
