V2.1 | 11-2022 Installation and Commisioning of Tankspion-IoT devices
5
Device Commissioning
•
After connecting the probe line with + and - to the connection terminal (see picture), remove the
contact protection foil of the battery. The LED lights up for approx. 10 seconds.
•
Then press the wake-up button once. The green LED lights up continuously during the dial-up
attempt. Please note that the first registration normally takes 2 to 5 minutes.
You may stick the enclosed QR code on the device lid or, for example, on the oil tank, on the tank
compartment door or, if necessary, further away.
Via QR code, the most recent tank content data can be retrieved and displayed.
