Tecsis E3907, Руководство по эксплуатации

Страница: 16 / 24

Operating manual
E3907
12 BE 984 i www.tecsis.de
4.6.2.1 Command overview
ASCII HEX Description
0
0x30 Query continuous measured value (signed integer)
1
0x31 Query maximal value (signed integer)
2 0x32 Query minimal value (signed integer)
3 0x33 Tare display
4 0x34 Reset maximal value
5
0x35 Reset minimal value
6
0x36 Actuate calibration control for sensors with 100 % control resistance
7
0x37 Switch off calibration control for sensors with 100 % control resistance
A
0x41 Read-Out datalogger
B 0x42 Delete datalogger
C 0x43 Read-Out current sensor parameter
D 0x44 Read-Out status
E
0x45 Read-Out complete status
g
0x67 Change protocol setup
k
0x6B ENTER
l
0x6C PLUS
m 0x6D MINUS
n 0x6E ESC
Outside of the measuring mode following commands are available:
ASCII HEX Description
A 0x41 Read-Out datalogger
C 0x43 Read-Out current sensor parameter
D
0x44 Read-Out status
E 0x45 Read-Out complete status
a 0x61 Write time
b 0x62 Read-Out time
c
0x63 Write company header
d 0x64 Read-Out company header
e 0x65 Write all sensor parameters
f
0x66 Read-Out all sensor parameters
g 0x67 Change protocol setup
k 0x6B ENTER
l 0x6C PLUS
m
0x6D MINUS
n 0x6E ESC