16
TS1001 Touch Screen Arming Station Installation Manual
10-
Inactivity Period
The LCD screen displays the currently selected value, and the range of
acceptable values.
Press the buttons that correspond to the desired value from 5 to 300 seconds
of inactivity before the inactive brightness levels apply, and then press the #
button (or press Enter # key) to apply the new value.
Note:
We recommend using smaller values in order to minimise power use in
mains fail conditions.
11-
Volume
The LCD screen displays the currently selected value, and the range of
acceptable values, of beeper volume.
Press the buttons that correspond to the desired value from 0% to 100%, and
then press the # button (or press Enter # key) to apply the new value.
12-
Area LED Configuration
By default, the RAS’s eight area LEDs are numbered 1 to 8 and indicate the state
of areas 1 to 8 (or as otherwise assigned in the Challenger10 RAS database).
Alternatively, the eight area LEDs can be numbered 9 to 16.
Press * to toggle the numbering of the eight area LEDs between 1 to 8 and 9 to
16, and then press the # button (or press Enter # key) to apply the new value.
13-
Factory Defaults
The factory defaults option resets this
RAS’s menu options 1 to 12 to their default
states.
