TECO UA1610, Руководство по обслуживанию

Страница: 379 / 388

D-4
(3) Removal of the Internet Fax & Network Scan Kit
2. Loosen one screw at the lower left corner of the
PWB mounting bracket and remove the two fixing
screws on the right.
3. Slide out the PWB mounting bracket in the direc-
tion of the arrow.
NOTES
Use the following precautions when installing the
PWB mounting bracket.
•
Fit the upper left corner of the PWB mounting
bracket into the cutout in the copier.
•
When installing the PWB mounting bracket in posi-
tion, use care not to allow the harness to be
wedged in mechanisms (shown inside a circle).
4980U043AB
4. Remove the one screw, and the Plate NIC Board.
4980U049AA
1. Remove the Internet Fax & Network Scan Kit
from IC socket BC31 of the Network Interface
Card.
NOTES
Use the following precautions when installing the
Internet Fax & Network Scan Kit.
•
Before installing the Internet Fax & Network Scan
Kit, first remove the Network Interface Card from
the copier.
•
During installation, align the round portion on the
IC socket with the cutoff corner of the Internet Fax
& Network Scan Kit.
1383U008AB
Field_Service_E.book 4 ページ ２００４年２月２５日 水曜日 午後６時５９分