TECO UA1610, Руководство по обслуживанию

Страница: 124 / 388

S-29
(1) Machine Setting
• Various settings for the machine’s operating environment can be specified.
No. Function Purpose Setting Details/Precautions
1
AUTO PANEL
RESET
To specify the time until the auto
panel reset operation is performed
after a copy cycle has been com-
pleted or after the last key opera-
tion. • The default setting is 1
minute.
• OFF
• ON: 0.5
1 2 3 4 5
2
ENERGY
SAVE MODE
To specify the time until the
machine enters Energy Save mode
after a copy cycle has been com-
pleted or after the last key opera-
tion. • The default setting is 15 min-
utes .
The length of time can be set
between 1 and 240 minutes.
3
DENSITY
(ADF)
To specify the scanning density
when using the Automatic Docu-
ment Feeder.
NOTE
• In order to reduce the appear-
ance of spots in copies, the
Automatic Document Feeder
density level is set for lighter
copies as a default.
• The default setting is
“MODE1”.
• MODE 1 :
For a lighter copy density in
order to reduce the appear-
ance of spots in copies
• MODE 2:
For printing copies with the
same density as the docu-
ment
4
DENSITY
(BOOK)
To specify the scanning density
when using the Original Glass. • The default setting is
“MODE1”.
• MODE1:
For printing copies with the
same density as the docu-
ment
• MODE2:
For a lighter copy density in
order to reduce the appear-
ance of spots in copies
5
PRINT
DENSITY
To specify the default print density. • The default setting is “ 0 ”.
The setting range is -3 to +3.
6
LCD CON-
TRAST
To specify the brightness of the
display. • The default setting is “ 0 ”.
The setting range is -1 to +2.
Field_Service_E.book 29 ページ ２００４年２月２５日 水曜日 午後６時５９分